0

I. Operating Instructions industrial vacuum cleaner
Notes before operating the vacuum cleaner
Always make sure that the vacuum cleaner must be disconnected before installing or dismantling on accessories.
Never operate the machine that filters placed incorrectly positioned, dirty or clogged.
Do not operate the machine with wet hands.
 
Operating vacuum cleaner
Insert the nozzle into the air intake hole in place until separation heard. To remove it, press the release button and pull the tube out of the inlet tube.
Insert the nozzle connected to the handle and table mats with suction nozzle remaining connections. You can remove the tubing or coils apart.
Pull the power cord from the vacuum and plugged into a power outlet.
Press the button on / off to open the machine.
 
Note when operating the vacuum cleaner:
Several types of vacuum tubing length can be adjusted by just pressing on the outside of the machine open.
Symbols on the wires said that the maximum length of wire may be used. Never wire curled under.
 
Note after operate the vacuum cleaner:
When cleaning the machine, turn off power before winding.
Unplug the cord socket on the machine and receiver. A hand holding the top wire and a wire coil hand track to avoid cable-stayed on you or on your computer.
 
Guide to choosing the accessories that come with vacuum cleaner
Tables combined hydrophilic: water suction table combinations can be used for hard floor or carpet. Use the table on the floor to absorb water on the floor selecting appropriate resources. When using the suction table for hard floors, hard fibers will be stretched at the back of the suction table. When used for carpet suction table, the stiff fibers will shorten the
                       .
Tables on the floor vacuuming combined: Desk Vacuum use for all types of flooring, floor tiles, stone floors, concrete floors, wooden floors ......... To clean on the floor in the corner smallest.
 
Smoking combined slot nozzle and dusting brush combinations: This nozzle can be used to suction slots or suction type brush. To select the style you want, turn the nozzle to turn their slots sucked into a sweep. Slit nozzle is used to suck the grooves, corner, between the pads or the hard spot to be touched. As head can sweep clean tables, chairs, beds, cabinets, books, lampshades and bookshelves.
                    
          
II. Operating manual and machine floor cleaning machine single industrial complex
Notes before operating the scrubber and associated plant:
Always ensure that the scrubber should be disconnected before installing or dismantling on accessories.
Never operate the scrubber placed incorrectly positioned, dirty or not fitted equipment.
Do not operate the machine with wet hands.
 
Operating scrubber and associated plant.
Insert brush and scrubber tray onto the correct position until it locks into the machine together and then operate. While activities are squeezed together the latest, the new machine operations.
Insert the nozzle connected to the machine and table water with a straw sucking the remaining connections. You can remove the tubing or coils apart.
Pull the power cord from the machine rub off and unplugged.
Press the button on / off to open the machine.
 
Note when operated scrubber and combines:
Certain scrubber conjugate length of tubing can be adjusted by just pressing on the outside of the machine open.
Symbols on the wires said that the maximum length of wire may be used. Never wire curled under.
 
Note after the operation scrubber and associated plant ::
When cleaning the machine, turn off power before winding.
Unplug the cord socket on the machine and receiver. A hand holding the top wire and a wire coil hand track to avoid cable-stayed on you or on your computer.
 
Guide to choosing the accessories that come with the machine scrubber and combines:
Brushes hard charge Combined scrubber brush combined with the cleaning machine can be used for floors, for all types of flooring, floor tiles, stone floors, concrete floors ......... To Cleaning on the floor in the smallest corner.
                       .
Plans incorporate soft brush: brush scrubber combined with the cleaning machine can use for flooring or carpet and hard use for all types of flooring, floor tiles, stone floors, concrete floors, wooden floors .. ....... To clean on the floor in the smallest corner.
 
Brush near pad combination: scrubber brush combined with the cleaning machine can be used for floors, for all types of flooring, floor tiles, stone floors, concrete floors ......... To Cleaning on the floor in the smallest corner.